"condition monitoring" - Selaus asiasanan mukaanArtikkelit
Aineistot 1-8 / 8
-
A Review on the Classification of Partial Discharges in Medium-Voltage Cables : Detection, Feature Extraction, Artificial Intelligence-Based Classification, and Optimization Techniques
(MDPI, 28.02.2024)
articleMedium-voltage (MV) cables often experience a shortened lifespan attributed to insulation breakdown resulting from accelerated aging and anomalous operational and environmental stresses. While partial discharge (PD) ... -
Detection of Multiple Partial Discharge Faults in Switchgear and Power Cables
(IEEE, 07.03.2019)
articlePartial Discharge (PD) measurements are considered as the early detection of insulation degradation in power system equipment. In switchgear and power cables, multiple PD faults may exist, which make the detection and ... -
Electro-magnetic Sensors for Online Condition Monitoring of Medium Voltage Cables
(AMA Association for Sensors & Measurement, 2020)
articleIncreased use of medium voltage (MV) cables demands for efficient condition monitoring in order to carry out timely predictive maintenance especially during incipient fault conditions emerging due ... -
Emerging Technologies based Use Case Development for Condition Monitoring and Predictive Maintenance of MV Cables
(IEEE, 28.11.2023)
articleCondition monitoring (CM) and predictive maintenance (PM) techniques can provide a system to achieve a high quality of service with minimal maintenance costs. Using CM -based data, repairing assets is possible based on ... -
Identification and Location of PD Defects in Medium voltage Underground Power Cables Using High Frequency Current Transformer
(Institute of Electrical and Electronics Engineers (IEEE), 24.07.2019)
articleFault location is an important diagnostic task in condition monitoring of underground medium voltage cables. Available solutions are well capable of determining the location of a single partial discharge (PD) defect on a ... -
Online condition monitoring of MV cable feeders using Rogowski coil sensors for PD measurements
(Elsevier, 01.02.2019)
articleCondition monitoring is a highly effective prognostic tool for incipient insulation degradation to avoid sudden failures of electrical components and to keep the power network in operation. Improved operational performance ... -
Performance Comparison of PD Data Acquisition Techniques for Condition Monitoring of Medium Voltage Cables
(MDPI, 18.08.2020)
articleAlready installed cables are aging and the cable network is growing rapidly. Improved condition monitoring methods are required for greater visibility of insulation defects in the cable networks. One of the critical ... -
Performance Evaluation of AI-based Algorithms for Condition Assessment of Power Components
(IEEE, 02.01.2023)
articleThis study compares the performance of different artificial intelligence (AI) based algorithms/ classifiers used for partial discharge (PD) classification during insulation diagnostics in power components. During PD ...
