Hae
Aineistot 21-30 / 139
Evaluating the Influence of Cetane Improver Additives on the Outcomes of a Diesel Engine Characteristics Fueled with Peppermint Oil Diesel Blend
(MDPI, 2021-05-12)
- article
This paper aims to evaluate the impact of cetane improvers on the combustion, performance
and emission characteristics of a compression ignition engine fueled with a 20% peppermint bio-oil/diesel blend (P20). It is ...
Improving the Energy Efficiency of Buildings Based on Fluid Dynamics Models : A Critical Review
(MDPI, 2021-08-30)
- article
The built environment is the global sector with the greatest energy use and greenhouse gas emissions. As a result, building energy savings can make a major contribution to tackling the current energy and climate change ...
Tyre pyrolytic oil fuel blends in a modern compression ignition engine : A comprehensive combustion and emissions analysis
(Elsevier, 2022-07-15)
- article
There is abundant worldwide research into combustion engine applications for tyre pyrolysis oil (TPO). However, most studies are methodologically outdated in terms of their assumed technology, either with regard to TPO ...
Factors affecting the performance of ventilation cavities in highly insulated assemblies
(SAGE Publications, 2021-03-01)
- article
The article presents experimental studies of typical Finnish highly insulated (HI) envelopes with thermal resistance values (R value) for the wall and roof inside the ventilation cavity between 7.7 and 8.1 m2K/W and 13 m2K/W, ...
Model predictive control for a multiple injection combustion model
(De Gruyter Open, 2021-12-14)
- article
In this work, a model predictive controller is developed for a multiple injection combustion model. A 1D engine model with three distinct injections is used to generate data for identifying the state-space representation ...
Research of Parameters of a Compression Ignition Engine Using Various Fuel Mixtures of Hydrotreated Vegetable Oil (HVO) and Fatty Acid Esters (FAE)
(MDPI, 2021-05-25)
- article
The present study is aimed at studying the energy and environmental performance at various engine loads (BMEP) with identical start of injection (SOI) for all fuel types. The combustion parameters for the fuel mixtures ...
Model-based on-board post-injection control development for marine diesel engine
(De Gruyter Open, 2021-12-31)
- article
The increasing demands for reducing fuel consumption and emissions in contemporary technology solutions lead to the use of more sensors, actuators, and control applications. With this increasing engine complexity, the ...
Renewable Fuels for Internal Combustion Engines
(MDPI, 2021-11-18)
- article
The continuous need for systematization and open dissemination of knowledge on Renewable Fuels intended for use in Internal Combustion Engines forms the premise of the presented Special Issue titled “Renewable Fuels for ...
Productivity Analysis of Fuyu Oil Shale In-Situ Pyrolysis by Injecting Hot Nitrogen
(MDPI, 2021-08-19)
- article
In this paper, the effect of heat injection on productivity of Fuyu oil shale during in-situ pyrolysis was studied by using heat flow coupling analysis method. It is found that fluid conducts heat transmission to the oil ...
Novel hybrid modeling approach for utilizing simple linear regression models to solve multi-input nonlinear problems of indoor humidity modeling
(Elsevier, 2022-02-01)
- article
Investigating indoor humidity is important because abnormal moisture levels can damage building structures and result in poor indoor air quality. Outdoor humidity, ventilation rate, and internal moisture load are the three ...